– Fits Most Rail Systems configured for Keymod products
– Small Grub Screws for tightening pinion gear to motor shaft.
– Comes in a set of 5
Please note for best result use a drop of locktite on the threaded before screwing
6x Standard 6mm brass bushing replacement for gen8 gearbox
Tired of shimming and re-shimming your gears every time you open up your box?
Then this is what you have been looking for.
– Comes in 7mm or 8mm
– Suits V2 / V3 Gearboxes
– Gears are not included (Please check store for gears)
Having gel ball feed issues with your hectic high speed upgrade?
Then you need to install this selector delay so that your gels will have more time to feed.
One of the Highest Quality Gel Blaster Gearbox in the Market.
Black Polymer Series (Stronger Shell).
Fully Built / Shimmed & Wired Gearbox.
Will Fit V2 Receivers. Such as Magpul, BD556, SLR, TTM, HK416, KUBLAI, and More
(Check Store for receivers)
Specifications
– Gearbox splits in two halves for easy maintenance / modding
– Screw Brackets System for a Stronger Box Lock
– FB Polymer Tappet
– FB Polycarbonate Selector Plate / Cut-Off Lever / Safety
– Metal Steel Gears (18:1)
– Alloy 100 Volume Cylinder
– Polymer Piston – 14T Steel Teeth
– Alloy Lightweight Ball Bearing Piston Head
– FB Padded Nose reduction Nylon Cylinder Head
– Lightweight FB Polymer nozzle
– Metal Anti Reverse Latch
– Steel 8mm Bearings
– Fighting Bro Quality Silver Wiring
– Polymer Spring Guide
– Strong Polymer Trigger
– 1.3 Steel Tension Spring
– Mini Tamiya Plug
– Polycarbonate FB T-Piece
– Includes T-Piece Tension Spring
– Includes Sector Delay
One of the Highest Quality Gel Blaster Gearbox Shell in the Market.
Will Fit V2 Receivers. Such as Magpul, BD556, SLR, TTM, HK416, KUBLAI, and More
(Check Store for receivers)
– Screw Brackets for a Stronger Box Lock
What is Included:
– FB 3.0 Nylon Split V2 Shell
– Tappet
– Cut Off Lever
– Safety Lever
– Nylon Trigger
– Nylon Spring Guide
– Nozzle and Rubber
– Screws and Springs for assemblyPlease Note: Some of the parts colour and look may be slightly different than pictured.
This is a fully UPGRADED Gen9/10 Nylon Gearbox.
All shimming, greasing, and wiring done.
What’s in the box:
1. Metal Ball Bearing Spring Guide
2. 1.3 Unequal Spring
3. Nylon Outer Shell
4. Polymer Plunger Steel Teeth (O-Ring Upgraded)
5. Metal Anti Reverse Latch
6. Silver Wiring (Mini Tamiya)
7. Metal Gears (Shimmed)
8. Warinterest Ported Brass Cylinder
9. Upgraded Nylon Flexi Tappet
10. Strong Stainless Return Spring
11. Solid Brass Padded Cylinder Head
12. Solid Brass O-Ring Nozzle
13. Metal Curved Trigger
Working Safe/Semi/Auto Selector Function
Please note the wiring plugs will be in the Mini Tamiya Plugs style to sustain the silver wiring upgrade.
Please note cylinder may be different style/colour. Function reamains the same
For fitment of standard spec M-Lok / Key Mod Handguard to Barrel Nut.
Includes:
– 4 x Handguard to Barrel Nut Hex Screws
– 2x Adaptor Spring Spacers
– 1x Allen Key
This is the NEWEST version of the Jin Ming Gen8 NYLON Gearbox.
– It is fully built with switch, wire, and t-piece.
– Has upgraded durable steel bearings
The easiest way to tell the difference between this and the older version is the JM LOGO on the side of the gearbox.
Can Fit Gen8 M4A1 / Scar V2 / UMP45, and some other blasters that accept Gen8
- Singularity Full Nylon Shell
- T-Piece & Motor Housing
- Steel coloured cylinder (May be a different colour than pictured)
- Upgraded Nylon Special Gen3 Tappet
- Strong Return Spring Upgrade
- High Speed Steel Bearings
- Nylon Internals: Gears, piston, and trigger
- Strong upgraded 1.3 spring
- Green O-Ring air seal upgrade
- Original Jin Ming 460 Motor
Please note that if you need this for scar v2, please advise us as we will attach the scar v2 t-piece.
Tired of stock ABS plunger stripping, or simply need to upgrade to metal gears? Then this is what you need.
– Quality Polymer Plunger with 14 Steel Teeth
– Come with a 6 hole piston head with o-ring
– Nylon head will reduce the noise of impact
– Fits Gen8/9/10 and V2 Builds
Showing 1–12 of 21 results