Need Some metal rails for your ACR 10 / G36?
Then these MLOK Rails are what you been looking for.
– Metal Material
– 3pc Set
– 6x Hex Screws
– Matte Black Coated Finish
– 9.8cm Long x 2cm Wide
Need Some metal rails for your Keymod Style Handguard?
Then these rails are what you been looking for.
– Metal Material
– 3pc Set
– 6x Screws / Nut Set
– Matte Black Coated Finish
– 2.17 inch (L) x 0.38 inch (H) x 20mm (W)
– Metal Material
– 3pc Set
– 6x Hex Screws for both Keymod & Mlok attachment
– Matte Black Coated Finish
- tested and approved by a number of Australian gel blaster modders
- compatibility with Jin Ming J9 and J10 OEM gearbox internals and T-piece
- unlike OEM JM compatible with aftermarket gears from SHS, FB etc
- cylinder and piston housing is reinforced with additional material
- wire slots have been designed to accept up to ø3mm wire
- additional wire guide to “tuck” the wire under the motor head
- 8mm bearings/bushings sockets are intentionally tighter to prevent slipping
- quick spring exchange
- all threads are form tapped which creates a much stronger thread 1-5 N m recommended tightening torque
- fully integrated non-conductive mag connector plate
- Aussie made and covered by 24 Months Australian Warranty!
Blaster / Receiver compatibility:
- JM Gen9
- JM ACR J10
- Azrael Titan LBB (must use J9 Cylinder, Cylinder Head, Tappet and Nozzle)
- Azrael Titan SBB (must use J9 Cylinder, Cylinder Head, Tappet and Nozzle)
- Azrael MPX (must use J9 Cylinder, Cylinder Head, Tappet and Nozzle)
- Hawkex MK2 (must use J9 Cylinder, Cylinder Head, Tappet, Nozzle and T piece)
- X-Power Magpul / Maopul Receiver
- TTM Receiver
- Other Ver.2 Style Receivers
Required Parts:
- v2 Piston/Plunger
- 8mm Bearings/Bushings
- All other parts can be stock/OEM J9/10
Mosfet Compatibility:
- Titan
- Perun
- Leviathan
Replacement 2 piece safety latch for JM GEN 9 / 10 / V2 Gearboxes
– 3D Printed Material
– Includes 1x small screw
Please note that this is for the latch as pictured, does not include spring.
Description:
– This is an upgraded Nylon JM Gen9 Gel Blaster
– Upgraded Nylon Gen 9 / Gen 10 Gearbox
– Fully Functioning Safe/Semi/Auto Mode
– This Blaster has been Chronographed @ 320FPS with Milky White Gel Balls.
Video of the test is on our Facebook page: https://www.facebook.com/bigbosstacticalaustralia/videos/196894218302058/
FPS may vary when using different gel balls
UPGRADED Gearbox Specifications:
– Strong Carbon Steel M90 Tension Spring
– Strong Nylon Tappet Plate
– Lightweight Polymer Cylinder Head
– Upgraded Tight Seal Nylon Nozzle
– Strong Steel Tappet Return Spring
– Polymer Piston (14T Steel Teeth)
– Steel Ball Bearing Spring Guide
– Alloy Ball Bearing Piston Head
– Upgraded Strong Nylon Gearbox Shell
– High Torque Long Axis 460 red Motor
– Strong Metal trigger
– Steel Anti-Reverse Latch
– Metal Motor Pinion Gear
– Metal Steel 18:1 Gears Set
– Upgraded Oversized Green O-Ring
Package Comes with:
– Upgraded Nylon JM9 Gel Blaster
– Original Stanag NylonMagazine + Mag Base
– Threaded Barrel Extension
– Nylon Buttstock with Swivel Mount
– Carry Handle Sight
– Ammo Bottle
– Safety Glasses
– Upgraded 11.1v Battery & Battery Charger
– Gel Ball Ammo
This is an UPGRADED Gen9/10 Nylon Gearbox.
All shimming, greasing, and wiring done.
When this gearbox is installed correctly in the gel blaster, it can produce an output of over 320FPS.
Check the video link on our Facebook page for the chronograph reading:
https://www.facebook.com/bigbosstacticalaustralia/videos/196894218302058/
What’s in the box:
1. Metal Ball Bearing Spring Guide
2. M90 Steel High Tension Spring
3. Strong Nylon Outer Shell
4. Polymer Plunger With Steel Teeth
5. Alloy Lightweight Ball Bearing Piston Head
6. Oversized O-ring Upgraded
7. Metal Anti Reverse Latch
8. 18:1 Metal Gears (Shimmed)
9. Steel 100% Volume Cylinder
10. Strong Nylon Flexible Tappet
11. Strong Stainless Return Spring
12. Lightweight Nylon Cylinder Head
13. Upgraded Tight Air-Seal Nylon Nozzle
14. Strong Metal Trigger
Working Safe/Semi/Auto Selector Function
Showing all 7 results