Need a speedy motor?
– Works with 7.4v / 11.1v Battery
– Size: 460 Long Axis Motor
– Rated speed: 35000rpm
– Comes with spring & metal pinion gear
- Designed for durability and comfort (Curved Design)
- Tough polymer material
- Full metal grip base with motor height adjust screw
- Includes mount screws
- Available in Black and Tan Colour
Need a speedy motor?
– Works with 7.4v / 11.1v Battery
– Size: 480 Long Axis Motor
– Rated speed: 48000rpm
– Comes with spring & metal pinion gear
- Designed for durability and comfort (Curved Design)
- Rectangle mount holes makes it easier to screw / connect to gearbox
- Internal motor guide tracks. (AOE Assist)
- Tough polymer material
- Full metal grip base with motor height adjust screw
- Includes 6 mount screws
- Available in Black and Tan Colour
- tested and approved by a number of Australian gel blaster modders
- compatibility with Jin Ming J9 and J10 OEM gearbox internals and T-piece
- unlike OEM JM compatible with aftermarket gears from SHS, FB etc
- cylinder and piston housing is reinforced with additional material
- wire slots have been designed to accept up to ø3mm wire
- additional wire guide to “tuck” the wire under the motor head
- 8mm bearings/bushings sockets are intentionally tighter to prevent slipping
- quick spring exchange
- all threads are form tapped which creates a much stronger thread 1-5 N m recommended tightening torque
- fully integrated non-conductive mag connector plate
- Aussie made and covered by 24 Months Australian Warranty!
Blaster / Receiver compatibility:
- JM Gen9
- JM ACR J10
- Azrael Titan LBB (must use J9 Cylinder, Cylinder Head, Tappet and Nozzle)
- Azrael Titan SBB (must use J9 Cylinder, Cylinder Head, Tappet and Nozzle)
- Azrael MPX (must use J9 Cylinder, Cylinder Head, Tappet and Nozzle)
- Hawkex MK2 (must use J9 Cylinder, Cylinder Head, Tappet, Nozzle and T piece)
- X-Power Magpul / Maopul Receiver
- TTM Receiver
- Other Ver.2 Style Receivers
Required Parts:
- v2 Piston/Plunger
- 8mm Bearings/Bushings
- All other parts can be stock/OEM J9/10
Mosfet Compatibility:
- Titan
- Perun
- Leviathan
Replace your flimsy plastic JM9 selector with this quality SHS METAL Selector.
Works on JM9, BD556, MAGPUL, and V2 Style Receivers.
Please Note Selector may be a slightly different design. Function is unaffected
Replacement 2 piece safety latch for JM GEN 9 / 10 / V2 Gearboxes
– 3D Printed Material
– Includes 1x small screw
Please note that this is for the latch as pictured, does not include spring.
Need a motor with a bit more pulling power than the stock motor for your JM9? This motor will do the job.
– Works with 7.4v / 11.1v Battery
– Size: 460 Long Axis Motor
– Rated speed: 30000rpm
– Comes with spring & pinion gear
Clear Original T-Piece for the Gen9 Gearbox
Original clear t-piece for Gen9 style gearboxes.
Please Note: T-Piece may be solid black colour. All function remains the same.
- Designed for durability and comfort (Curved Design)
- Tough polymer material
- Full metal grip base with motor height adjust screw
- Includes mount screws
- Available in Black and Tan Colour
- Strongest Ver.2 Grip in the market
- Ergonomically Designed for Maximum Comfort
- Strong AEG Grade Quality Polymer Series (Not the Nylon Series)
- Fits 460 and 480 Long Axis Motors
- Hinge Base / Door Cover System
- Motor Height Adjustable trough base
- Include 4 Mount Screws and 1 Door Grub Screw
- Available in Black and Tan Colour
Showing all 11 results