The Custom High Speed Motor (Long) is super fast.
It has the same neodymium magnets as the custom high torque motor, but larger gauge wiring and fewer turns on the armatures giving it roughly 10,000 rpm more than the Custom high torque (or 10-15 shots per second more, depending on your setup).
Turn your gun into a screamer with this high speed motor upgrade. Makes for a great replacement motor if your old one is past its prime. The Long axle on this motor makes it compatible with most Version 2 blasters.
You will likely need a large type nimh battery or lipo (7.4v or 11.1v) to make the most of this monster.
Tired of shimming and re-shimming your gears every time you open up your box?
Then this is what you have been looking for.
– Comes in 7mm or 8mm
– Suits V2 / V3 Gearboxes
– Gears are not included (Please check store for gears)
Quality and Reliable Noise Reduction Upgrade Kit for your V2 / V3 Gearbox Build. Includes: – 80% Ported Steel Cylinder – Concave Padded Noise Reduction CNC Alloy Cylinder Head – Noise Reduction CNC Alloy Piston Head – CNC Alloy 14T Piston (Full Metal) – CNC Alloy O-Ringed Nozzle – Nylon Ver.2 / Ver.3 Element Tappet Plate Some Parts may be different colour or design. Function remains the same
Replace your plastic selector with this quality alloy CNC Cut Mode Selectors.
– Compatible with BD556 / TTM / LS / AEG and most M4 Receivers.
– Available in Black / Red / Silver
Please note that these are straight swap out selectors. You will need to use the original pin and spring that you are replacing.
Upgrade your gearbox for durability and air seal with this kit.
– Alloy Nozzle has an O-Ring with a tighter Cylinder Head to Nozzle Seal
– Fits Gen8 Gen9 and ACR10 Gearboxes
Includes:
– Nylon Plunger 15T
– Alloy 6 Hole Piston Head and O-Ring
– Alloy Tight Seal Dual O-Ring Cylinder Head (Silicone Padded)
– Alloy O-Ring Tight Seal Nozzle
Anti-Heat selector plate with high conductive contacts.
Nylon Selector Plate will fit these gearbox types:
– JM Gen 9 / Gen 10 Gearboxes
– MKT CNC Gearboxes
– All V2 style Gearboxes
- Designed for durability and comfort (Curved Design)
- Tough polymer material
- Full metal grip base with motor height adjust screw
- Includes mount screws
- Available in Black and Tan Colour
- CNC 7075 Alloy Material
- Internal O-Ring for tighter air seal
- Lightweight alloy (2grams)
- Fits Kublai / Fighting Bro / LDT / Version 2 Cylinder Heads
Quality Nylon V2 Tappet Plate for your AEG Gearbox Build.
Tappet will work in V2 Gearboxes and WELL M4 Gearbox.
Quality Nylon V3 Tappet Plate for your AEG Gearbox Build.
Tappet will work in V2 / V3 Gearboxes and WELL M4 Gearbox.
This CNC Alloy V2 Upgrade Kit will fit JM Gen 9, Gen 10, and all Version 2 Gearboxes
Includes:
- Selector Plate
- Semi Auto Cut-Off Lever
- Safety Latch
- Anti Reverse Latch
- Sector Delay Chip
- Designed for durability and comfort (Curved Design)
- Rectangle mount holes makes it easier to screw / connect to gearbox
- Internal motor guide tracks. (AOE Assist)
- Tough polymer material
- Full metal grip base with motor height adjust screw
- Includes 6 mount screws
- Available in Black and Tan Colour
Showing 1–12 of 36 results