The Custom High Speed Motor (Long) is super fast.
It has the same neodymium magnets as the custom high torque motor, but larger gauge wiring and fewer turns on the armatures giving it roughly 10,000 rpm more than the Custom high torque (or 10-15 shots per second more, depending on your setup).
Turn your gun into a screamer with this high speed motor upgrade. Makes for a great replacement motor if your old one is past its prime. The Long axle on this motor makes it compatible with most Version 2 blasters.
You will likely need a large type nimh battery or lipo (7.4v or 11.1v) to make the most of this monster.
41000RPM Super High Speed Motor UPGRADE for your WELL M4 / BD556
– Strong NDFeB Magnet Structure
– High Speed / High Torque
– Also Fits JM9 and JM ACR
Anti-Heat selector plate with high conductive contacts.
Nylon Selector Plate will fit these gearbox types:
– JM Gen 9 / Gen 10 Gearboxes
– MKT CNC Gearboxes
– All V2 style Gearboxes
Replace your SLR plastic cylinder head and nozzle with this air tight quality alloy one.
– Quality Brass Material
– Rubber O-Ring Base for better pressure and noise reduction
– Inner O-Ring inside nozzle for an air tight seal
– Dual O-Ring on cylinder Head for air tight seal to the cylinder
Please note that cylinder head may look slightly different but function will remain the same
Replace your plastic cylinder head and nozzle with this Brass air tight quality one.
– Fits Gen8 / Gen9 / Gen10 / V2 Builds
– Rubber O-Ring Base for better pressure and noise reduction
– Inner O-Ring inside nozzle for an air tight seal
– Dual O-Ring on cylinder Head for air tight seal to the cylinder
Please note that there are 2 versions of these brass cylinders, they both work the same way.
You may receiver one or the other depending on availability.
Replace your plastic cylinder head and nozzle with this Brass air tight quality one.
– Fits Gen8 / Gen9 / Gen10 / V2 Builds
– Rubber O-Ring Base for better pressure and noise reduction
– Inner O-Ring inside nozzle for an air tight seal
– Dual O-Ring on cylinder Head for air tight seal to the cylinder
Please note that there are 2 versions of these brass cylinders, they both work the same way.
You may receiver one or the other depending on availability.
Replace your Fighting Bro plastic cylinder head and nozzle with this Brass air tight quality alloy one.
– Quality Brass Material
– Rubber O-Ring Base for better pressure and noise reduction
– Inner O-Ring inside nozzle for an air tight seal
– Dual O-Ring on cylinder Head for air tight seal to the cylinder
- Nylon Material
- Tan Colour
- Metal Base Plate
- Adjustable motor height with base screw
- Fits V2 M4 / HK416 Style Receivers
- Fits 460 / 480 Long Axis Motors
This CNC Alloy V2 Upgrade Kit will fit JM Gen 9, Gen 10, and all Version 2 Gearboxes
Includes:
- Selector Plate
- Semi Auto Cut-Off Lever
- Safety Latch
- Anti Reverse Latch
- Sector Delay Chip
This is a fully UPGRADED Gen8 Nylon Gearbox.
All shimming, greasing, and wiring done.
What’s in the box:
– STRONG QUALITY NYLON OUTER GEARBOX SHELL
– ALLOY PISTON HEAD (O-RING UPGRADED)
– METAL 18:1 GEARS (PERFECTLY SHIMMED)
– SHS POLYMER PLUNGER / STEEL TEETH
– METAL AIR TIGHT CYLINDER HEAD
– METAL O-RING AIR TIGHT NOZZLE
– ALLOY BEARING SPRING GUIDE
– METAL ANTI-REVERSE LEVER
– DOUBLE TORQUE 460 MOTOR
– METAL PINION MOTOR GEAR
– COLOURED STEEL CYLINDER
– STRONG RETURN SPRING
– 10AMP OMRON SWITCH
– STEEL BUSHINGS
– NYLON TRIGGER
– NYLON TAPPET
– SILVER WIRING
Please Note: Gearbox does not come with fire mode selector option
Original Jinming Gen 9 Nylon Grip
Weather you are doing a new JM9 build, or just needing a replacement,
this grip is what you need.
– Adjustable motor height with base screw.
Nylon Selector Plate will fit these gearbox types:
– JM Gen 9 / Gen 10 Gearboxes
– MKT CNC Gearboxes
– All V2 style Gearboxes
Showing 1–12 of 16 results